Knowledge

The method of connecting a wire to each end of a thermoelectric resistor to lead out a resistance signal is called a two wire system.

The most widely used thermoelectric materials are platinum and copper: platinum has high resistance accuracy

Thermal resistors typically require the transmission of resistance signals through leads to computer control devices or other secondary instruments.

A thermal resistor is the most commonly used temperature detector in the medium to low temperature range.

The installation height of the pressure block must be consistent, usually at a height of 150-2000mm above the level

The ceramic fine holes of armored thermocouples will fail if the components are sealed, and the method of electrostatic dust removal is often used to

It has bendable performance, and the Kaizhuang thermoelectric resistor can bend in any direction except for the head

The calibration method for the rapid armored thermocouple calibration device of metal melt is as follows

Armored thermocouples are the most widely used temperature devices in temperature measurement.

Armored thermocouples mainly consist of junction boxes, terminal blocks, and armored thermocouple components

Armored thermocouple electrodes are two types of conductors with different compositions that are welded at both ends to form a circuit.

Exposed end type: short thermal response time; Suitable for temperature measurement that requires fast response, such as measuring engine exhaust emis